Setup-Guru Forum - View Single Post

**Brad H** · 07:31 AM

Hi Ronnie,

I am assuming you are referring to Cup, I have run a 1:40.487 using Volker's Infineon setup with different gearing.

Diff Ratio: 4.000
Transmission Ratios 2.067:1, 1.556:1, 1.261:1 and 1.043:1

The main issue I have running this track is that the hairpin is so tight I need a high first gear trans ratio, so I tend to oversteer coming out of other corners when in first gear.

I do have the replay for the lap above, but for some reason all my Montreal replay files are very large (6mb for 1 lap when zipped). I'm not sure why this occurs, as it doesn't seem to happen for other tracks.

If you PM me your email address I can try to send it to you.

I am not good at Road Courses, so I would say you will be able to run a similar time with that setup.

I would suggest not comparing your lap times to Richard Towler's - it will just make you unhappy

.

Cheers

Brad

	(#3 (permalink))
Brad H 2-Ton Quick Lift Floor Jack Status: Offline Posts: 111 Join Date: Feb 2006 Location: Sydney Australia	09-16-2008, 06:31 AM Hi Ronnie, I am assuming you are referring to Cup, I have run a 1:40.487 using Volker's Infineon setup with different gearing. Diff Ratio: 4.000 Transmission Ratios 2.067:1, 1.556:1, 1.261:1 and 1.043:1 The main issue I have running this track is that the hairpin is so tight I need a high first gear trans ratio, so I tend to oversteer coming out of other corners when in first gear. I do have the replay for the lap above, but for some reason all my Montreal replay files are very large (6mb for 1 lap when zipped). I'm not sure why this occurs, as it doesn't seem to happen for other tracks. If you PM me your email address I can try to send it to you. I am not good at Road Courses, so I would say you will be able to run a similar time with that setup. I would suggest not comparing your lap times to Richard Towler's - it will just make you unhappy. Cheers Brad Last edited by Brad H; 09-16-2008 at 07:31 AM.